A new Chinese national reference material (GBW04481) for calcite oxygen and carbon isotopic microanalysis

Carbonate oxygen (O) and carbon (C) isotopes are widely used as proxies for tracing the processes and physicochemical conditions of many geological events and environmental changes in Earth Science. In particular, O and C isotopic variations at micrometer scales revealed by modern microbeam analytical techniques such as SIMS and NanoSIMS are robust archives for reconstructing palaeoenvironment and paleoclimate changes at annual and seasonal resolution or even higher temporal resolution. Widespread application of carbonate O and C isotopic microanalysis in Earth Sciences, however, has been restricted due to limitation of high-quality carbonate reference materials for O and C isotopic microanalysis. We introduce in this paper a new calcite reference material for calcite O and C isotopic microanalysis. This calcite is collected from a drill-core of the Oka carbonatite complex (Quebec, Canada). We demonstrated that the Oka calcite is fairly homogeneous in O and C isotopic compositions at micrometer scales based on homogeneity test by hundreds of SIMS O and C isotopic analyses. Precise determinations by using conventional gas-source IRMS yield the recommended value of δ¹⁸O_VPDB = −23.12 ± 0.15‰ (1SD) and δ¹³C_VPDB = −5.23 ± 0.06‰ (1SD) for the Oka calcite, which has been certified as the first class of Chinese national certified reference material (GBW04481) for O and C isotopic microanalysis.     

气相色谱-质谱法同时测定染整助剂中18种氯代烃类有机溶剂

建立了同时测定染整助剂中18种氯代烃类有机溶剂的气相色谱-质谱(GC-MS)检测方法。加入适量氯化钠的染整助剂样品经正十四烷振荡提取后,以DB-624超高惰性毛细管柱(30 m×0.25 mm,1.4μm)为色谱柱进行分离分析,电子轰击(EI)离子源选择离子监测(SIM)模式进行质谱监测,外标法定量。结果显示,18种氯代烃类有机溶剂可在19 min内完成色谱分离分析,在0.2～100 mg/L质量浓度范围内线性关系良好,相关系数(r~2)均不低于0.999 2,检出限(LODs,S/N=3)和定量下限(LOQs,S/N=10)分别为0.033～0.063 mg/L和0.11～0.19 mg/L。在低、中、高3个加标浓度水平下,阴性样品荧光增白剂1#(液体)和柔软剂2#(固体)中18种氯代烃类有机溶剂的平均加标回收率分别为93.3%～104%和92.7%～104%,相对标准偏差(RSD,n=6)分别为3.5%～5.3%和3.2%～5.4%。对23种不同性能的染整助剂进行测定,在3种染整助剂中检出四氯乙烯。该方法灵敏度和准确度高,精密度好,适用于各种染整助剂中18种氯代烃类有机溶剂的测定,为染整助剂的质量监控提供了参考。     

一种离轴计算全息图在凹非球面检测中的应用

为了精确检测大口径非球面面型质量,将CGH作为补偿器应用于凹非球面的离轴全息检测系统中.根据计算全息图的离轴全息检测系统检测凹非球面的基本原理,分析了离轴CGH的计算、制作过程,实现了对口径为150 mm,近轴半径为1499.7 mm,非球面系数为-1的凹非球面镜的检测.实验结果与轮廓仪检测结果吻合得很好.     

基于J-C本构模型的Comp.B炸药落锤冲击数值模拟

为研究Comp.B炸药在惯性冲击下的力学响应特性, 基于Johnson-Cook本构模型, 对 点火前的Comp.B炸药大落锤(400kg)冲击实验进行了数值模拟. 在不同应力加载条件下模 拟计算得到了用状态方程和不用状态方程的$\sigma$-$t$曲线, 对比应力峰值、应 力上升时间等主要力学参数, 结果表明考虑了状态方程的数值模 拟结果与实验吻合最好, 可以很好地模拟炸药惯性冲击下的力学响应.     

Asymptotic Property of Approximation to xαgnx by Newman Type Operators

The approximation of ｜x｜ by rational functions is a classical rationalproblem. This paper deals with the rational approximation of the function xasgnx, which equals ｜x｜ if α=1. We construct a Newman type operator rn（x） and show max｜x｜≤1{｜x^αsgnx-rn（x）｜}-Cn-α/2e-√2nα where C is a constant depending on α.     

某一类控制系统中发生的指数偏差现象

我们考虑在某类控制系统中,以Lyapunov指数作为观测量,远离给定遍历测度的那些周期测度.对于这类周期测度的数量关于周期的指数增长率,我们将用测度熵在某个集合上的上界给出它的一个上限控制.     

激光诱导间质热疗中生物组织的温度场研究

激光诱导间质热疗疗效评估的前提是必须获得准确的激光在不同功率、不同照射时间的生物组织温度场分布.利用多物理场直接耦合分析软件COMSOL Multiphysics构建了在组织光学参量不变情况下的三维有限元传热模型.该模型基于Pennes生物传热方程和轴对称高斯形状的激光光束热源方程,参量针对离体猪肝组织,考虑到了生物组...     

Cosmic ray test for a T0 detector

The endcap of time-of-flight (ETOF) detector in BES (Beijing Spectrometer) III is planned to be upgraded by using multi-gap resistive plate chambers (MRPCs) and the designed time resolution of the MRPCs is around 50 ps. Thus a time-zero (T0) detector needs to be built to offer a high quality reference time for the MRPCs beam test. So a T0 detector is built using plastic scintillator tiles (BC420) to couple with four fast phototubes (PMTs, Hamamatsu H6533). The timing properties of the detector is studied by using a cosmic ray test and factors related to the time resolution, such as plastic scintillator size, readout mode and angle effects, are discussed. T0 detector timing resolutions of ～41-62 ps are achieved, which means that the T0 detector can be used in the MRPC beam test.     

ֱ���绡��������˫�¶Ȼ�ѧ��ƽ����ֵģ��

采用二维轴对称双温度化学非平衡(2T-NCE)模型,模拟了带有水冷约束管的大气压直流电弧氩等离子体发生器.得出了不同工作参数下等离子体中电子温度、重粒子温度的变化关系,表明直流电弧等离子体有很强的非平衡特性,且变化规律十分明显.